Why does my Hobart Welding System have low weld output?
If your Hobart Welding System has low weld output, dress or replace the tips and check the tip threads, replacing if necessary. Also, remove and clean the tongs, and clean the ends of the tongs and tong holders.
How to fix a Hobart Welding System with no weld output?
If your Hobart Welding System has no weld output, check the line fuses and replace them if necessary.
What to do if my Hobart Welding System burns through at the point of weld?
If your Hobart Welding System is burning through at the point of weld, try adjusting the tong pressure. You may also need to dress or replace the tips, or realign the tips.
Why does my Hobart Welding System require a longer weld time?
If your Hobart Welding System requires longer than normal weld time, start by dressing or replacing the tips. Also, clean the workpieces, adjust the tong pressure, clean the ends of the tongs and tong holders, and check the input line voltage.
General| Brand | Hobart |
|---|---|
| Model | HSW 15 |
| Category | Welding System |
| Language | English |
To Next Page