Hobby King TRAINSTAR - Pre-Flight Checks; Control Surface and Channel Condition

CHECK THE CONTROL SURFACE AND CHANNEL
CONDITION
6
Before trying to fly the airplane , please carefully check to make sure the transmitter and the
servos work normally. CAUTION: Make sure that you must turn on the transmitter firstly and
then you can connect the battery plug. If you want to turn off the transmitter you must ensure
that the battery of the plane must be cut off first.
Mode 1 vs. Mode 2
Depending on which region of the world you are in, you will either use a Mode 1 orMode 2 transmitter.
The difference between the two modes deals with the throttle anddirectionnal inputs of the control sticks.
Mode 2 transmitters have the throttle control on the left stick and the directional controls on the right
stick. Mode1 transmitters havethe inputs reversed with throttle on the right and directionnal control on
the left. Theillustrations below detail the stick inputs for both Mode 2 transmitters
12
ON
(Right Throttle) (Left Throttle) (Right Throttle) (Left Throttle)
(Right Throttle) (Left Throttle)