EasyManuals Logo

Hobie 16 User Manual

Hobie 16
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
hobie.com
Mast Preparation
5. Attach the main halyard rope to the main halyard wire (falling from
the mast head) with a bowline knot. Set the halyard wire and rope
alongside the mast.
Attach the main halyard rope to the black cleat and then thread it
through the shackle of the halyard cable and secure it back to the
black cleat.
6. Attach the opposite ends of the
bridle wire to the shackle on the
bottom of the forestay adjuster.
If you have a jib furler, attach
the two ends of the bridles to
the furler chain plate using the
shackle.

Other manuals for Hobie 16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hobie 16 and is the answer not in the manual?

Hobie 16 Specifications

General IconGeneral
CategoryCatamaran
Length16 ft 7 in (5.05 m)
Sail Area218 sq ft (20.3 m2)
Hull MaterialFiberglass
Weight320 lbs (145 kg)
Beam2.41 meters (7.9 feet)
Mast Height26 ft 6 in (8.07 m)

Related product manuals