Hobie Mirage Compass Instruction Manual

6
Using the hatch in the center of the cockpit as an access point, create a
3/16” hole in your preferred location for mounting an eyelet post near
the seat. Thru-bolt the eyelet post assembly using the correct hardware.
This eyelet post will act as a tie-off point for fixing the trolley line at
a given position. Place a drop of Loctite on the threads of the screw
to create a doubly secure fastener. Be sure the eyelet post doesn’t
interfere with your paddle or seat.
5
Installation
10-32 X 1”

Hobie Mirage Compass Specifications

General

Fitted Hull Weight	68 lbs / 31 kg
Capacity	400 lbs / 181 kg
Hull Construction	Rotomolded Polyethylene
Seat	Vantage CT
Length	12 ft / 3.66 m
Width	34 in / 0.86 m
Storage	Front Hatch, Rear Cargo Area
Vantage Seat Capacity	275 lbs / 125 kg