EasyManuals Logo

Hobie Mirage Compass Instruction Manual

Hobie Mirage Compass
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
6
Use the mounted eyelet
posts to tuck the trolley
line underneath and
keep it out of your way.
On The Water
Wrap the trolley line
around the thru-bolted
eyelet post to hold the
anchor trolley in a fixed
position.
Attach your anchor point to the rear-most ring and move the trolley back
to drift facing downstream/downwind. Attach your anchor point to the
forward-most ring and move the trolley forward to drift facing upstream/
upwind. To drift sideways, slide the trolley to the middle then loop the top
trolley line over the eyelet post tie-off point.
Tips: Add a clip such as a carabiner to the rings for running anchor lines,
and easily switching back and forth between the front and back ring.
Maintenance: Over time, the line will stretch and slacken on the sides of the
boat. Tighten up the lines periodically to keep the trolley system taut.

Other manuals for Hobie Mirage Compass

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hobie Mirage Compass and is the answer not in the manual?

Hobie Mirage Compass Specifications

General IconGeneral
Fitted Hull Weight68 lbs / 31 kg
Capacity400 lbs / 181 kg
Hull ConstructionRotomolded Polyethylene
SeatVantage CT
Length12 ft / 3.66 m
Width34 in / 0.86 m
StorageFront Hatch, Rear Cargo Area
Vantage Seat Capacity275 lbs / 125 kg

Related product manuals