Hobie Mirage Outback User Manual

25
hobie.com
Fishfinder Option
Skimmer Transducer Installation
1
Skimmer style transducers will mount to the
posts inside the transducer cavity using the
hardware that comes with the Kayak’s Owners
Manual.
2
Leave a small gap
between the bottom
of the transducer and
shield to allow water
flow.
NOTE: Extension tabs and
friction washers are included
with your owner’s manual.
These tabs install to the
transducer mounting post
and can be oriented to face
either fore or aft to
accommodate a variety of
transducer designs.
1/8”

Hobie Mirage Outback Specifications

General

Drive System	MirageDrive 180 with Kick-Up Fins
Hull Construction	Rotomolded Polyethylene
Capacity	1 person
MirageDrive	MirageDrive 180 with Kick-Up Fins
Rod Holders	4
Width	34" / 0.86 m
Weight Capacity	425 lbs