3 0 C o n f i g u r a t i o n
HP-327 HIT-4U
ALARM
Alarm function. OFF
RATE LO
RATE HI
RATE LOHI
TOTAL
TEST
N/A OFF
TOTSET
Total alarm set
point.
Numeric
Entry
0.001
9999999
1000.00
LO SET
Rate alarm low
set point.
Numeric
Entry
0
999999
10.00
HI SET
Rate alarm high
set point.
Numeric
Entry
0
999999
100.00
4.2 Default Configuration
HIT-4U is fully configured by the factory prior to shipment. When the
instrument is purchased with a Hoffer Flowmeter or when calibration
and configuration data are supplied, the instrument is configured as
specified. When calibration or configuration data is not available, the
instrument is shipped with default values. Refer to the above table for
a listing of the HIT-4U factory default configuration.
To Next Page
Loading...