Hofmann Megaplan MS400-2 - Wheel Balancing Machine Calibration

BALANCING MACHINE CALIBRATION
Models:
M400-2(C) - M400P-2(C) - M400P-2(D)
No.
Description
Image
1
Fit a medium-sized wheel with steel rim on the shaft.
Example: 6” x 15” (± 1”)
2
Take the exact measurements of the wheel mounted
Caution!! Presetting of incorrect
dimensions would mean that the machine is not
correctly calibrated, therefore all subsequent
measurements will be incorrect until a new self-
calibration is performed with the correct
dimensions!
3
Press
SHEET 015