Need help?Do you have a question about the Hofmann geodyna 7100 and is the answer not in the manual?
General| Power supply | 230V 1ph 50/60Hz |
|---|---|
| Weight | 120 kg |
| Rim width | 1.5 - 20 inches |
| Wheel Width Range | 1.5 - 20 inches |
| Balancing Accuracy | ±1 g |
Essential safety rules to follow before operating the equipment.
Lists the documentation provided with the unit.
Explains text styles used to draw attention to specific information.
Details electrical power supply, consumption, motor rating, and fuses.
Specifies measuring time, speed, offset, and resolution.
Lists max width, diameter, weight, and rim specifications.
Lists weight, shipping weight, and dimensions.
Outlines temperature and humidity ranges for use and storage.
Describes the unit's purpose for dynamic and static balancing of vehicle wheels.
Explains the function of various indicators and displays on the control panel.
Details the function of each key on the control panel.
Describes methods for securing car wheels using different adaptors.
Operator familiarization and pre-operation checks before powering up.
Step-by-step guide for performing standard and special balancing procedures.
Details different weight application positions and required data.
Step-by-step guide for replacing the mains fuse.
Procedures for calibrating the machine, including user calibration.
Explains various error (E) and warning (H) codes displayed by the system.
Contact information and resources for customer support.
Guidelines for the proper disposal of electrical and electronic equipment.
Details installation requirements, procedures, and checks.
To Next Page