Need help?Do you have a question about the Hofmann geodyna 2600 and is the answer not in the manual?
Rules for trained personnel, proper use, modifications, electrical safety, and protective gear.
Instructions for connecting the machine to the power supply, emphasizing qualified electricians.
Lists necessary inputs: balancing mode, wheel size (width/diameter), and distance.
Explains different balancing modes (nor., Alu 1-5) for various weight positions and rim types.
Details entering wheel dimensions for standard balancing, including rim width measurement.
Shows correct gauge arm application for different weight positions (normal, Alu 1-5) on various rims.
Describes automatic and manual methods for determining distance and diameter using the gauge arm.
Procedure for determining hidden weight positions (AP1, AP2) for Alu 3P balancing mode.
Procedure for determining hidden weight positions (AP1, AP2) for Alu 2P balancing mode.
Steps for starting a measuring run, indexing the wheel, and attaching weights at correction positions.
General guidance for fitting hammer-on and adhesive weights for various balancing modes.
Performing a check run for perfect balance and displaying/correcting static unbalance.
Procedure for changing operational modes using C codes, including saving to permanent memory.
Lists and explains error codes E1 through E8, covering incorrect dimensions, guard status, gauge arm, compensation, calibration, and wheel type.
Explains error codes E9, E15, E16, E17 related to Pro-Match issues, adjustment range, and wheel slippage.
Details error codes E83, E88, E89, E92 for vibration, speed limits, stuck keys, and defective gauge arms.
Lists Pro-Match recommendation codes (H0-H3) and positioning errors (H20, H21).
Covers errors H80, H82, H90, H91 related to lost calibration, disturbed self-test, slow acceleration/deceleration, and speed variations.
Explains fatal error codes related to line voltage (300/C10 XXX) and acoustic error messages.
Detailed sequence for the Pro-Match program, including entering valve position and possible readings.
Instructions for the minimisation program if compensation run was omitted, including tire adjustment and valve entry.
General| Balancing speed | 200 rpm |
|---|---|
| Wheel width | 1.5 - 20 inches |
| Max. wheel weight | 65 kg |
| Power supply | 230V 50/60 Hz |
| Balancing Accuracy | 1 gram |
| Measuring time | 8 s |
To Next Page