Need help?Do you have a question about the Hofmann geodyna 4500-2 and is the answer not in the manual?
General| Weight | 120 kg |
|---|---|
| Rim Width | 1.5 - 20 inches |
| Max. Wheel Weight | 70 kg |
| Balancing Accuracy | 1 g |
| Power Supply | 230 V / 50-60 Hz |
Explains manual reading aids and symbols.
Defines the machine's intended use and capabilities.
Covers general safety rules for machine operation.
Details the machine's functions, controls, and operation modes.
Step-by-step guide for unpacking the machine.
Instructions for changing the machine's installation location.
Guides on fitting the wheel guard and its holder.
Details electrical connection requirements and procedures.
Provides an overview of the machine's controls and displays.
Details the functions of the key pad buttons.
Explains the display elements and operator prompts.
Describes power-on status, default settings, and error codes.
Instructions for fitting the centering and clamping device.
Guides on performing a compensation run.
Details clamping car and light-truck wheels.
Instructions for clamping motorcycle wheels.
Explains balancing using the Easy Alu feature.
Details the measuring process for balancing.
Guides on correctly fitting balance weights.
Explains how to perform a check run.
Covers static unbalance measurement and correction.
Instructions for entering vehicle type.
Guides on entering weight placement data.
Instructions for entering rim dimensions for standard balancing.
How to determine and enter the distance measurement.
Entering balance dimensions for special cases.
Entering dimensions for static unbalance display.
Instructions for storing wheel profiles.
Automatic input of wheel data.
How to correct entered dimensions.
Outlines the procedure for behind-the-spokes placement.
Selecting balancing mode and inputting wheel data.
Balancing the measured unbalance with this method.
How to view and set operating modes.
Details various function codes for machine settings and operations.
Explains operator errors and their corresponding messages.
Provides general hints for messages.
Lists fatal error messages and their causes.
General information on run-out optimisation and weight minimisation.
Instructions for using optimisation/minimisation programs.
Step-by-step guide for run-out optimisation.
Step-by-step guide for weight minimisation.
Procedure for operator readjustment using calibration weight.
Information on contacting customer service.
To Next Page