Need help?Do you have a question about the Hofmann geodyna OPTIMA II and is the answer not in the manual?
General| Rim Width | 1.5" - 20" |
|---|---|
| Wheel Weight (max.) | 70 kg |
| Power Supply | 230V 50/60 Hz |
| Max Wheel Weight | 70 kg |
| Balancing Accuracy | 1 g |
Provides general safety guidelines and rules to be followed for safe operation of the machine.
Lists and describes optional accessories available for the machine, enhancing its functionality.
Details the function and layout of the machine's control panel keys and their associated operations.
Explains the screen layout, display fields, and how information is presented to the operator.
Describes the machine's state and initial operations upon powering up, including self-tests.
Provides step-by-step instructions for securely clamping and releasing the wheel on the balancer.
Details the usage of the measuring gauge for acquiring wheel data, including distance and diameter.
Describes the basic functions and settings available in the manual operating mode for wheel balancing.
Details the specific functions and automatic operations available in the OPTIMA mode for advanced wheel analysis.
Explains how to perform a measuring run in the PROFILING mode for automatic wheel data acquisition.
Describes the additional functions available in the Entry Screen for the OPTIMA mode.
Displays data and graphs on wheel runout, providing detailed analysis of potential defects.
Provides analysis of the rim's runout, independent of the tyre, for detailed diagnostics.
Details the report generated after a rim-only run, including unbalance and diagnostic data.
Allows saving a detailed report of the vehicle's tyre tread condition for analysis.
Provides a 3D graphical analysis of the wheel, displaying tyre wear and surface conditions.
Describes the process of measuring wheel imbalances and identifying points for weight application.
Details the procedures for fitting balance weights, including clip-on and adhesive types.
Explains how to select and use the mode for fitting weights behind the wheel spokes.
Instructions for initiating the optimisation or minimisation cycle for wheel balancing.
Details the steps for performing a weight minimisation cycle on the wheel.
Describes how to save changed operating modes and parameters permanently in the machine's memory.
Lists available operating modes and their settings, including factory defaults.
Lists critical error codes displayed by the machine, indicating severe operational issues.
Provides weekly cleaning instructions for the machine's components, focusing on the rear camera glass.
Details the necessary space, floor, and power supply requirements for installing the wheel balancer.
To Next Page