• To stop slide-out before it reaches IN position, release switch. To continue move-
ment push and hold switch in.
• After slide-out is all the way retracted locate two removed locking bar mecha-
nisms.
• Place bar mechanisms between wall and top edge of slide-out.
• Turn handles to snugly tighten lock bars
and move handles to locked positions
so that slide-out cannot move.
Manual Operation
• To move slide-out manually open storage
compartment underneath bed.
• Move lever on motor to opposite side and
turn end of shaft with wrench to move
slide-out.
• Move lever to original position for normal operation.
Slide-Out Room Maintenance
Before retracting slide-out room remove any debris from outdoor top of room.
Periodically treat outside seals with pliable silicone lubricant.
NOTES
Admiral 3-23
Appliances & Equipment
Appliances & Equipment
HOLIDAY
RAMBLER
2000
To Next Page
Loading...
