14 of 16
Question Answer
My timer shows it is watering but
there is no water coming through?
☑ There may be an airlock in the system
☑ Disconnect the timer and reset it
☑ Flush your irrigation system before
attaching to the timer again
How do I reset my timer? ☑ Simply remove the battery for
5-10 mins then reinsert. Your
timer will be reset to default
Why won’t my timer turn off after
the programmed run time?
☑ Setting multiple start times
or incorrect programming
may have been entered
☑ When going through the
programming of your timer, you
first set your current time and day
☑ Next, set run time (e.g. 20 mins)
☑ Next, set watering days
(e.g. all 7 days)
☑ Next, set start time. You can make the
program you have already set (every
day, for 20 mins), come on up to 4
times per day
☑ You cannot enter a start time
for each day individually
Troubleshooting
(continued)
The Holman website has a host of additional information on features. Head to
support.holmanindustries.com.au for more tips, tricks and support content.
If you still need help, feel free to email our friendly Customer Service team at
support@holmanindustries.com.au.
To Next Page
Loading...
