15 of 16
Troubleshooting
(continued)
Question Answer
Is my timer suitable for short-run
drip or micro spray irrigation?
☑ Yes, although a Pressure Reducer
(VPR200) placed on the tap, before
the timer is recommended
☑ If only running a few drippers or
sprayers, it is not suitable. Use the
Low Pressure Tap Timer (CO1603)
Can I run this off a gravity-fed
or low-pressure system?
☑ This timer is not suitable for
low pressure applications.
It is designed for normal tap
pressure 250kPa to 600kPa
Is it OK to use my timer over winter? ☑ We do not recommend the use of
your timer over the winter period
☑ Temperatures below 3 degrees
Celsius may damage the timer. We
advise the timer to be removed
over the winter period, or allowed
to drain if left on the tap.
Can I get spare parts for my timer?
☑ Yes, some parts are available
for this timer. For more
information, please contact us at
support@holmanindustries.com.au
Low
Pressure
Tap Timer
CO1603
This product provides easy to install and
easy to use solutions for watering pots,
hanging baskets, shrub areas, ower beds
and small lawns. Ideal for low pressure
applications like tanks.
Reduce the pressure from your tap with a
Holman Pressure Reducer. This product is
ideal for reducing the water pressure to
200kPa for your poly pipe and drip systems
that water garden beds or vertical gardens.
Pressure
Reducer
VPR200
To Next Page
Loading...
