8
PROGRAMMING
Set current time & correct day
Turn the dial to “Set Clock/Calendar” position.
The minutes will be ashing. Use the
or
to adjust.
Press
button and the “hour” will ash. Use
or
to adjust.
NOTE: AM/PM must be set correctly.
Press
and the “day of the week” will ash. Use
or
to set the
correct day.
Set Calendar
NOTE: The calendar only needs to be set when selecting Odd/Even day watering in
areas where water restrictions may require this feature.
Press
button until the year, month and day are shown. The “year” will be ashing.
Use
or
to adjust if required.
Press
and the “month” will ash. Use
or
to adjust if required.
Press
and the “date” will ash. Use
or
to adjust if required.
HINT: To return to the clock, turn dial to another position.
Before proceeding, ensure the spare watering planner has been completed. From
your planner, you should be aware which stations (valves) are allocated to each
program. Set one program at a time to ensure that the schedules are completed
correctly.
To Next Page
Loading...
