SH
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230. 11
Product description
The standard-design SH sweeper roller is intended for
front-mounting on loaders. However, attachments are
available for a number of other applications, e.g. lorry or
tractor. SH is powered by two direct-acting hydraulic
motors; these are designed for a flow of between 70 and
200 l/min.
The suspension of the sweeper roller ensures constant
and even pressure against the surface. This minimises
brush wear and ensures responsiveness to inclines and
uneven surfaces.
Standard model
The standard-design sweeper roller has a polythene
(plastic) splash guard.
Extra equipment
There is a range of extra equipment available for SH:
• Sprinkler system with a 600-litre tank, complete with
pump, tank and spraying ramp. See figure 4.
• Electrohydraulic angling allows turning of the roller
while on the move, and the machine only requires a
single hydraulic function (figure 3).
• Lateral movement enables the roller to be moved to
the side hydraulically ± 0.7 m.
• Lorry attachment with built-in lifting function for
VV-85, DIN plate or equivalent.
• Various types of brush, conventional or Dusk design,
steel or plastic.
• Universal electrical cabling.
3.Electrohydraulic angling
Directional valve
Distribution block
4.SH equipped with sprinkler system
To Next Page
Loading...
