EasyManuals Logo

Holux GR-213 Specification Sheet

Holux GR-213
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Specifications
Tracks up to 20 satellites.
Receiver: L1, C/A code
Max update rate: 1 HZ.
Acquisition time
Reacquisition 0.1sec.averaged
Hot start 1 sec., averaged
Warm start 38 sec., averaged
Cold start 42 sec., averaged
Position accuracy
Non DGPS (Differential GPS)
Position 5-25 m CEP without SA
Velocity 0.1 m/sec, without SA
Time 1 usec sync GPS Time
EGNOS/WAAS:
Position
< 2.2 m, horizontal 95% of time
< 5 m, vertical 95% of time
Dynamic Conditions:
Altitude 18,000 meters
(60,000 feet ) max
Velocity 515 meters / second
(700 knots) max
Acceleration 4 G, max
Jerk 20 meters/second, max
Antenna Type: Built in Patch Antenna
Minimum signal tracked: -159dBm
Dimension: 2.54 × 1.65 × 0.7 Inch
Weight : < 84g
Waterproof: IPX7
LED function:
Power On/Off and Navigation
Update Indication
Operating temperature:
-40
to +80
Storage temperature:
-45
to +100
Operating humidity:
5% to 95% No condensing.
Power consumption
< 80mA at 4.5- 5.5V input
Protocol and interface:
NMEA output protocol: V.2.2
Standard:
Baud rate: 4800 bps
Data bit: 8
Parity: N
Stop bit: 1
Format: GGA,GSA,GSV, RMC.
Optional:
Baud rate: 9600,19200,38400
Format: GLL,VTG, ZDA, SiRF
binary
Interface:
RS232 + CMOS TTL Level, or
RS-232 + DGPS

Other manuals for Holux GR-213

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Holux GR-213 and is the answer not in the manual?

Holux GR-213 Specifications

General IconGeneral
BrandHolux
ModelGR-213
CategoryGPS
LanguageEnglish

Related product manuals