To Next PageTo Next PageWhat to do if Holux GPS M-1000 execute fails?
If the Holux GPS M-1000 execute fails, it might be due to an unstable Bluetooth function. Try turning the M-1000 off and on. Also, restart your PDA or PC and reconnect, referring to section 5.2 “Bluetooth device connection installation”.
How to fix Holux GPS M-1000 if it can't be found?
If you can't find the Holux GPS M-1000, it might be caused by a poor Bluetooth connection. Restart your PDA or PC and refer to section 5.2 “Bluetooth device connection installation”.
Why does my Holux M-1000 have no output but the timer is running?
If your Holux GPS timer is counting but there's no GPS output, it could be due to a weak or nonexistent GPS signal. Try testing it in an open area and use the “Cold start” function in Mini GPS Viewer. Alternatively, the ephemeris and almanac data in the GPS memory might be outdated if it hasn't been used for a while. To resolve this, remove the battery for 3 seconds, re-insert it, and power on the device again.
What to do if I can't open the COM port for my Holux GPS?
If you can't open the COM port for your Holux GPS, the Bluetooth connection might be interrupted, or the COM port is being used by other programs. Check the Bluetooth connection. Also, identify and close any other programs that might be conflicting with the COM port.
General| Product color | Black |
|---|---|
| WAAS capability | Yes |
| Channels quantity | 32 channels |
| GPS accuracy - position | 2.2, 5 m |
| GPS accuracy - velocity | 0.1 m/s |
| Bluetooth version | 1.2 |
| Battery capacity | 50 mAh |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -10 - 60 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 43 mm |
|---|---|
| Width | 65 mm |
| Height | 17.6 mm |
| Weight | 53 g |
Lists fundamental specifications like chipset, channels, frequency, and receiver type for the GPS unit.
Details the time taken for reacquisition, cold start, warm start, and hot start of GPS satellite signals.
Specifies the positional and velocity accuracy of the GPS receiver under different conditions.
Outlines limitations regarding altitude, velocity, acceleration, and jerk for safe and effective operation.
Describes the power source, including external voltage requirements and internal battery specifications.
Details output protocols, baud rate, data bit, parity, stop bit, and data formats.
Covers physical dimensions, weight, operating temperature, and humidity for the device.
Lists additional functions like Bluetooth frequency, input sensitivity, and LED indicators.
Provides instructions on how to charge the device's battery for the first time use.
Explains how to power on the device and shows expected LED status for Bluetooth and GPS.
Describes the physical components of the M-1000, referring to diagrams for visual identification.
Details the status and description of various LED indicators on the device for monitoring.
Explains the function of the power switch and its associated LED indications for device control.
Details the power jack and data port, including pin definitions and connector types.
Initial settings on Pocket PC to manage GPS automatically for seamless data access.
Instructions to start the Bluetooth Manager and enable the device's Bluetooth capability.
Steps to search for nearby Bluetooth devices and initiate a new partnership.
Guidance on choosing the specific Bluetooth device 'HOLUX_M-1000' for connection.
Connecting to the 'Serial port' or 'SPP Slave' and finalizing the Bluetooth setup.
Setting up a new outgoing COM port for the Bluetooth GPS receiver on the connected device.
Completing the Bluetooth setup process and recommendations on connection stability.
Instructions on enabling navigation map programs to utilize the GPS functionality.
Description of the initial window and interface elements of the Mini GPS Viewer program.
Configuring baud rate, scanning COM ports, and opening GPS within the viewer application.
Viewing GPS information and status, including satellite acquisition and positional data.
Explains setup options like Hot/Warm/Cold Start for re-acquiring GPS satellite ephemeris data.
Lists the system requirements for installing the USB data cable driver on a computer.
Step-by-step guide to install the driver for the GR230-A2 USB data cable.
Important notes on verifying COM port settings and potential conflicts for navigation software.
Troubleshooting steps for when the device shows no GPS output but the timer is active.
Addresses issues related to execution failures and unstable Bluetooth functions.
Solves problems related to COM port access or conflicts with other system programs.
Troubleshooting steps for when the Bluetooth GPS receiver cannot be found by the host device.
