Need help?Do you have a question about the Holux GR-213 and is the answer not in the manual?
General| Chipset | SiRF Star III |
|---|---|
| Channels | 20 |
| Update Rate | 1 Hz |
| Antenna | Built-in patch antenna |
| Bluetooth Profile | SPP |
| Operating Temperature | -10°C to 60°C |
| Storage Temperature | -20°C to 70°C |
| Type | GPS Receiver |
| Accuracy | 3m |
| SBAS | WAAS, EGNOS, MSAS |
| Interface | USB, Bluetooth |
| Battery | Lithium-ion |
| Acquisition Time | Warm start: 33 sec |
Explains the process of satellite acquisition and tracking initialization by the GR-213.
Describes how the GR-213 provides navigation data like position, velocity, and time after acquisition.
Lists the minimum hardware and software requirements for installing the GR-213 USB driver.
Provides step-by-step instructions for installing the USB driver from the CD to the computer.
Offers crucial advice for verifying COM port settings after USB driver installation.
Explains the NMEA 0183 output format and default communication parameters.
Details the GGA message format, including its data fields and their meanings.
Explains the GLL message format, covering latitude, longitude, and time data.
Details the GSA message format, including DOP values and active satellite information.
Describes the GSV message format for displaying satellite identification, elevation, and azimuth.
Explains the RMC message format, providing essential navigation data like UTC time and status.
To Next Page
