Holux GR-213 Specification Sheet

GR-213 GPS Receiver
 Features:
 Builds on SiRFstarIII chipset with embedded ARM7TDMI CPU available for customized
applications in firmware.
 20 parallel satellite-tracking channels for fast acquisition and reacquisition.
 200,000 effective correlators for fast TTFF (Time-To-Fast-Fix), and Extremely fast TTFF’s at
low signal level.
 Built-in hardware Tracking Loop Processor WAAS/EGNOS Demodulator support.
 Built-in repeatable and rechargeable Lithium-ion battery for Time- to- First-Fix (TTFF).
 Support NMEA 0183 v2.2 data protocol.
 Enhanced algorithms provide superior navigation performance in urban, canyon and foliage
environments.
 For Car Navigation, Marine Navigation ,Fleet Management ,AVL and Location-Based
Services , Auto Pilot ,Personal Navigation or touring devices ,Tracking devices/systems and
Mapping devices application.

Holux GR-213 Specifications

General

Chipset	SiRF Star III
Channels	20
Update Rate	1 Hz
Antenna	Built-in patch antenna
Bluetooth Profile	SPP
Operating Temperature	-10°C to 60°C
Storage Temperature	-20°C to 70°C
Type	GPS Receiver
Accuracy	3m
SBAS	WAAS, EGNOS, MSAS
Interface	USB, Bluetooth
Battery	Lithium-ion
Acquisition Time	Warm start: 33 sec