Why Holux GPSport 245 GPS cannot display my current location?
If your Holux GPS isn't showing your current location, make sure that buildings or other obstructions are not interfering with the GPS signal.
What to do if my Holux GPS cannot start?
If your Holux GPS unit won't start, it might be due to insufficient battery charge. Connect it to the adapter and restart the system.
What to do if Holux GPSport 245 has no screen displayed?
If the screen on your Holux GPS isn't displaying anything, try these steps: * Connect the adapter and restart the system. * Perform a hard reset by pressing both the [Enter] and [right arrow] keys.
Why is the display speed too slow on my Holux GPSport 245?
If the display speed on your Holux GPS is too slow, it could be due to a low battery. Check if the battery is low on power. If that's not the issue, try a hard reset by pressing both the [Enter] and [right arrow] keys.
What to do if Holux GPS screen has no response?
If the screen on your Holux GPS is unresponsive, try a hard reset of the system by pressing both the [Enter] and [right arrow] keys.
Guidelines for safe use of the power adapter and device, including environmental considerations.
Lists the key capabilities and functionalities of the GPSport 245 device.
Illustrates and labels the front and rear components of the GPSport 245 device.
Provides step-by-step instructions for charging the device using the AC adapter.
Instructions for turning the system on/off and navigating the menu.
Details the various display modes and information shown on the device's screen.
Explains different screen configurations like Meter, Speed, Distance/Time, and Altitude.
Allows configuration of the Finder list with coordinate fields.
Guides on editing coordinate names and setting points for the GPS Finder.
Shows current and stored coordinates, and usage scenarios like finding vehicles.
Explains icons for Sport Mode, POI, Backlight, Satellite, Memory, and Battery status.
Configure sport mode and input weight for calorie calculation.
Configure general device settings and system parameters like time, unit, and language.
Sets time or distance intervals for logging data.
Sets time, speed, and distance alerts, and allows resetting them.
Delete logs, set time format, time zone, unit, and language.
Manually edit or reset odometer values.
Guides through initial configuration of LCD, language, unit, time, and sport mode.
Solutions for common issues like power, screen, and GPS problems.
Precautions for handling, operating temperature, and cleaning the device.
Details chip, physical dimensions, display, environment, language, and waterproofing.
General| Water Resistance | IPX7 |
|---|---|
| Chipset | SiRF Star III |
| Channels | 20 |
| Antenna | Built-in patch antenna |
| Update Rate | 1 Hz |
| Acquisition Time (Hot Start) | 1 second |
| Backlight | Yes |
| Data Logging | Yes |
| Interface | USB |
| Acquisition Time (Warm Start) | 35 seconds |
| Data Format | GPX |
| Battery | Lithium-ion |
To Next Page
