Home Styles Monarch - Drawer Assembly; STEP 1: Assemble Drawer Sides and Back; STEP 2: Insert Drawer Base; STEP 3: Secure Drawer Base

N2
Figure 2
MAKE SURE ROLLER
IS ON THE BACK
S2
S3
S6
S5
S5
S1
Figure 3
Figure 5
Insert wood screws (4X)
into the pre-drilled holes in S5
and tighten. (see Figure 3)
short
Insert S6 into grooves in S1 and
S2. (see Figure 2)
STEP 5
STEP 3
STEP 4
Tighten all screws used in drawer assembly.
Assemble Pull Handle with
machine screws. (see Figure 4)
Assembly Instructions 5/5
Part List
S1.
Front Part
2 pcs.
S6.
Divider
4 pcs.
S2.
Back Part
2 pcs.
S3.
Side Part
2 pcs.
S4.
Side Part
2 pcs.
Drawer (S)
Attach S1 to S3 and S4, using
a and
wood screws ,
tighten halfway.
Attach S2 to S3 and S4 using
wood screws ,
tighten halfway. (see Figure 1)
Phillips screwdriver
(4X)
(4X)
long
long
S4
S3
S1
S2
Figure 1
STEP 1
N3
S4
S1
S2
S3
S5.
Base Part
2 pcs.
Slide S5 into the grooves in S3
and S4. Be sure to push S5 all
the way forward so it meets S1.
(see Figure 2)
STEP 2
S4
S6
Figure 4
S1
S2