14
Operating Instructions
7. TEMP
Press this button to increase the indoor temperature by 1°F
increments. You can set the temperature up to 86°F.
TEMP
Press this button to decrease the indoor temperature by 1°F
increments. The lowest temperature that can be set is 62°F.
Hold both TEMP and
the two temperature systems: °C and °F.
Note:
• Setting the temperature is not available in Fan mode.
• When the Silence function is activated, the unit will reduce the noise
to the lowest level and create a quiet and comfortable environment.
To activate/disable the SILENCE function, press the SILENCE/FP
.
•
a steady 46°F and prevents freezing, most especially in vacation
homes or rooms that are not frequently used in winter and could
be susceptible to damage. To activate/disable the FP function,
To exit the FP function, press the ON/OFF, SLEEP, SILENCE/FP,
MODE, FAN or TEMP buttons.
Press to set auto-on time (in 30-minute increments). When setting the
time and it reaches 10 hours, if you continue to press the button, it
will increase the time to 60-minute increments. To cancel the auto-on
timer, press this button to adjust it to 0 hour.
Press to set auto-off time (in 30-minute increments). When setting the
time and it reaches 10 hours, if you continue to press the button, it
will increase the time to 60-minute increments. To cancel the auto-off
timer, press this button to adjust it to 0 hour.
Press to Start or Stop the Swinging of the Horizontal Louver.
Press to activate the Follow Me feature. For details, refer to the "Follow
Me Setting" in the “Other Features” section on Page 11.
Press to turn the Display On or Off.
1
2
4
3
5
6
8
9
7
10
12
13
14
11
To Next Page
Loading...
