13
Operating Instructions
REMOTE CONTROL
Note:
• The buttons on the remote control might be slightly different from
the actual one you purchased. The actual remote you received
(including its buttons) shall prevail.
• If the function or feature described isn’t available in your unit,
then nothing will happen when pressing the relative button for
that function or feature on the remote control.
Press to turn the unit on or off.
AUTO
COOL
DRY
HEAT FAN
Note: Do not select Heat Mode if you purchased the cooling-only model.
Cooling-only appliances don't support Heat Mode.
Press to select the fan speed. You can choose from any of the
Auto Low Med High
Press to activate/disable the sleep function. In sleep mode, the unit
can maintain a comfortable temperature while saving energy. This
function is available in COOL, HEAT, or AUTO mode only.
For complete details, see Sleep Mode in the “Other Features” section
on Page 11.
Note: To exit Sleep Mode, just press MODE, FAN, or the ON/OFF
button.
The Turbo function enables the unit to reach the preset temperature
unit does not support this function, nothing will happen when you
press this button. Press the TURBO button to activate/disable this
function.
In SELF CLEAN mode, the unit will automatically clean and dry the
evaporator and keep it fresh for the next operation. Press the SELF
CLEAN button to activate/disable this function.
1
2
4
3
5
6
8
9
7
10
12
13
14
11
To Next Page
Loading...
