EasyManua.ls Logo

HoMedics BP-A11-02CA - User Manual

HoMedics BP-A11-02CA
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Fabriqué en Chine
IB-BPA-110A
P/N: 323102179 VER: 001
GARANTIE RESTREINTE (AU CANADA SEULEMENT)
HoMedics Group Canada garantit que tous les éléments sont exempts de défauts de qualité
d’exécution et de matériel durant cinq (5) ans à compter de la date d’achat initiale. La
garantie est applicable lorsque les articles sont utilisés aux fins auxquelles ils sont destinés.
Les articles seront réparés/remplacés au moyen de pièces/articles neufs/remis à neuf et/ou
de pièces/articles alternatifs (à notre discrétion) si l’acheteur INITIAL a obtenu une autorisa-
tion de retour (RA) du Service à la clientèle et s’il a envoyé l’article accompagné de son
reçu ORIGINAL.
Ce moniteur de pression sanguine est conforme aux tests de mesures cycliques simulées
selon EN1060-3, partie 8.10. Cette garantie s’adresse uniquement aux consommateurs, et
non aux détaillants.Les frais de livraison et les taxes doivent être PRÉPAYÉS à HoMedics
Group Canada par L’ACHETEUR. La présente garantie vous accorde des droits pouvant
varier selon la province. La présente garantie peut être modifiée. La présente garantie est
non transférable.
Ce qui n’est PAS couvert
Usure normale, vieillissement, décoloration de la mousse/de l’article, odeur, aplatissement,
densité, variation, fuite, altération, manutention inadéquate, réglage inadéquat, usage abusif,
mauvais entretien, dommages dus à l’alimentation, accidents, utilisation locative, articles
périmés, entretien par tout autre personnel que celui d’HoMedics Group Canada, emploi de
pièces non autorisées par HoMedics Group Canada, dommages subis pendant l’expédition,
surgonflage, négligence, articles vendus « en l’état » ou dommages dus à un acte de la
nature ne sont PAS couverts.
Comment obtenir le service au titre de la garantie
Vous devez obtenir une autorisation de retour et des instructions AVANT d’envoyer votre
article sans quoi celui-ci sera REFUSÉ. Veuillez obtenir une autorisation de retour par le
biais du Service à la clientèle par :
Courrier postal : HoMedics Group Canada
344 Consumers Road, Toronto (Ontario) Canada M2J 1P8
Téléphone : 416-785-1386
Télécopieur : 416-785-5862
Numéro sans frais : 1-888-225-7378
entre 8:30 et 17 h 00, du lundi au vendredi HNE
www.homedics.ca
Distribué par:
HoMedics Group Canada
344 Consumers Road
Toronto (Ontario)
Canada, M2J 1P8
Tél: (416) 785-1386
Téléc: (416) 785-5862
Sans Frais:
1-888-225-7378
par la poste :
HoMedics Group Canada
344 Consumers Road
Toronto (Ontario) Canada
M2J 1P8
téléphone :
416-785-1386 :
8 h 30 à 17 h 00 HNE
Du lundi au vendredi

Questions and Answers

  • T
    tracyclementsAug 21, 2025
    What to do if my HoMedics Blood Pressure Monitor shows EE error?
    • S
      Sandra BrownAug 21, 2025
      If the HoMedics Blood Pressure Monitor displays the 'EE' error symbol or the blood pressure value is excessively low or high, ensure the cuff is correctly placed. Wrap the cuff properly so that it is positioned correctly. Also, remain still and do not talk during measurement. Keep your arm steady during measurement. Avoid shaking the arm with the cuff on.
  • M
    michael65Aug 23, 2025
    What does E1 error mean on HoMedics Blood Pressure Monitor?
    • W
      William MclaughlinAug 23, 2025
      The E1 error on your HoMedics Blood Pressure Monitor indicates an air circuit abnormality. This could mean the cuff tube isn't properly connected to the monitor. Check the cuff connection and then measure again.
  • V
    Victoria RyanAug 26, 2025
    What does E2 error mean on HoMedics Blood Pressure Monitor?
    • S
      Shelia MitchellAug 26, 2025
      The E2 error on your HoMedics Blood Pressure Monitor means the inflation pressure exceeded 300 mmHg. To resolve this, switch the unit off and then measure again.
  • S
    Samantha BuckleyAug 27, 2025
    What does E3 error mean on HoMedics Blood Pressure Monitor?
    • S
      Samantha HernandezAug 28, 2025
      The E3 error on the HoMedics Blood Pressure Monitor indicates an error determining measurement data. Try measuring again.
  • K
    Kaitlyn WeberAug 30, 2025
    What to do if HoMedics Blood Pressure Monitor displays EE error?
    • J
      Jacqueline TorresAug 30, 2025
      The EE error on your HoMedics Blood Pressure Monitor typically indicates an issue with the measurement. This can occur if the cuff is not positioned correctly; ensure it's wrapped properly. It can also happen if you move or talk during the measurement; keep your arm steady and measure again. Shaking your arm while the cuff is on can also cause this error.
  • B
    bartonoliviaSep 1, 2025
    Why my HoMedics Blood Pressure Monitor does not turn on?
    • K
      Karla WebsterSep 1, 2025
      If your HoMedics Blood Pressure Monitor does not turn on, it could be due to depleted batteries. Replace them with four new "AA" alkaline batteries. Another possibility is that the batteries are incorrectly positioned. Double-check and re-insert them in the correct positions.
  • D
    David AdamsSep 3, 2025
    How to fix E1 error on HoMedics Blood Pressure Monitor?
    • K
      Karen CookSep 3, 2025
      An E1 error on your HoMedics Blood Pressure Monitor suggests an air circuit abnormality. This might be because the cuff tube isn't properly connected to the monitor. Check the cuff connection and then try measuring again.
  • D
    Debbie MurraySep 5, 2025
    What to do if HoMedics Blood Pressure Monitor shows E2 error?
    • B
      brendawellsSep 5, 2025
      The E2 error on the HoMedics Blood Pressure Monitor indicates that the inflation pressure exceeded 300 mmHg. To resolve this, switch the unit off and then attempt to measure your blood pressure again.
  • T
    Tiffany LewisSep 7, 2025
    What does EP error mean on HoMedics Blood Pressure Monitor?
    • X
      xdaltonSep 7, 2025
      The EP error on the HoMedics Blood Pressure Monitor indicates a system error. You should try measuring again.
  • A
    amyalvarezSep 9, 2025
    What to do if the HoMedics Blood Pressure Monitor shows an EE error or the reading is too high/low?
    • J
      Jennifer HartSep 9, 2025
      If you see the 'EE' error symbol on your HoMedics Blood Pressure Monitor, or if the blood pressure reading seems unusually low or high, it could be due to a few reasons. First, make sure the cuff is wrapped correctly and positioned properly on your arm. Also, avoid talking or moving during the measurement. Keep your arm still to ensure an accurate reading. Shaking your arm while the cuff is on can also cause this error.

HoMedics BP-A11-02CA Specifications

General IconGeneral
BrandHoMedics
ModelBP-A11-02CA
CategoryBlood Pressure Monitor
LanguageEnglish

Related product manuals