HoMedics TotalClean - Troubleshooting; Unit Will Not Operate; Reduced Airflow; Reduced Odour Removal

GB I 7
PROBLEM POSSIBLE CAUSE SOLUTION
Unit will not operate • Unit is not plugged in
• Power button not pressed
• No power to unit
• HEPA-type lter is not installed correctly
• Grille cover is not installed correctly
• Plug unit in
• Press the power button to turn the power on
• Check fuses, try a dierent outlet
• Reinstall the HEPA-type lter
• Reinstall the grille cover
Reduced airow • The back grille may be blocked
• Pre-lter needs vacuuming
• The HEPA-type lter needs to be replaced
• Check to make sure nothing is blocking the back
grille and air outlet
• Vacuum the pre-lter with the brush
attachment of your vacuum cleaner
• Replace the HEPA-type lter
Reduced odour removal • The HEPA-type lter needs to be replaced • Replace the HEPA-type lter
Excessive noise • The unit is not level • Place the unit on a at, level surface
Replace lter light remains lit
after lter replacement
• The replace lter indicator needs to be
reset
• Press and hold the ioniser button for 3 seconds
until the replace lter light turns o
Display lights are o • Nightlight setting • Press the nightlight button until the desired
lights are on/o
TROUBLESHOOTING