What to do if HoMedics Blood Pressure Monitor shows EE error?
If your HoMedics Blood Pressure Monitor displays the EE error symbol, it could be due to a few reasons. First, ensure the cuff is wrapped properly and positioned correctly, then measure again. Another reason might be movement or talking during the measurement; keep your wrist steady and try again. It can also happen because of shaking of the wrist with the cuff on.
Why my HoMedics Blood Pressure Monitor does not turn on?
If your HoMedics Blood Pressure Monitor isn't turning on, the batteries may have run down; replace them with two new “AAA” alkaline batteries. Also, check that the battery polarities are positioned correctly and re-insert them if needed.
What to do if HoMedics Walgreens WGNBPW-910 Blood Pressure Monitor shows E2 error?
If your HoMedics Blood Pressure Monitor displays the E2 error symbol, it means the inflation pressure exceeded 300 mmHg. Switch the unit off and then measure again.
What does E1 error mean on HoMedics Walgreens WGNBPW-910?
If your HoMedics Blood Pressure Monitor shows the E1 error symbol, it indicates an air circuit abnormality. Try measuring again.
How to fix E3 error on HoMedics Walgreens WGNBPW-910?
If your HoMedics Blood Pressure Monitor displays the E3 error symbol, it means there was an error determining measurement data. Try measuring again.
What does EP error mean on HoMedics Blood Pressure Monitor?
If your HoMedics Blood Pressure Monitor displays the EP error symbol, it indicates a system error. Try measuring again.
General| Brand | HoMedics |
|---|---|
| Model | Walgreens WGNBPW-910 |
| Category | Blood Pressure Monitor |
| Language | English |
Explains the importance of monitoring blood pressure for health.
Discusses the White Coat Hypertension phenomenon.
Explains symbols like Weak Battery, Pulse, IHB, and Risk Category Index.
Explains error codes like EE, E1, E2, E3, EP and their meanings.
Lists conditions requiring battery replacement (weak battery symbol, no display).
Instructions to follow before taking a measurement for accuracy.
Instructions to follow during the measurement process for accuracy.
Notes about the IHB feature, suitability for arrhythmias, and consulting a doctor.
FCC compliance statement and user guidance on interference.
Explains emissions guidance for the device.
Explains immunity guidance for the device.
To Next Page