40
Hazard information
Do not use the device if there are signs of dam-
age to the housing, control elements or connect-
ing sockets, for example. If you have any doubts,
have the device checked by an expert.
The device may only be operated in dry and dust-
free environment and must be protected from
the eects of moisture, vibrations, solar or other
methods of heat radiation, excessive cold and
mechanical loads.
The device is not a toy; do not allow children to
play with it. Do not leave packaging material lying
around. Plastic films/bags, pieces of polystyrene,
etc. can be dangerous in the hands of a child.
We do not assume any liability for damage to
property or personal injury caused by improper
use or the failure to observe the hazard informa-
tion. In such cases, any claim under warranty is
extinguished! For consequential damages, we as-
sume no liability!
The actuator is part of the building installation.
The relevant national standards and directives
must be taken into consideration during planning
and set-up. The device has been designed solely
for operation on a 230V/50 Hz AC supply. Only
To Next Page
Loading...
