35
Operation
• Select the desired solution for your device.
• In the app, give the device a name and allocate
it to a room.
After pairing, connected loads can be easily switched on
and o or the energy consumption can be measured.
6 Operation
After pairing and installing have been performed, simple
operations are available directly on the device.
• Press the system button (A) shortly to switch on
and o connected loads.
Improper usage or a defective installation (e.g.
low-quality or defective plugs or sockets) can
lead to overheating of the pluggable switch and
meter. The integrated temperature control auto-
matically switches o the load. The devices is
protected against overheating and secure opera-
tion is ensured. As soon as the temperature
reaches a non-critical value, you can switch on
the pluggable switch and meter again. Always
observe the permitted ambient temperature of
the device and, if necessary, have the installation
checked for possible error sources by an expert.
To Next Page
Loading...
Need help?
General
