Honda 08E91-E22-100A - Page 10

10 of 23 AII 38576-38846 (0802) © 2008 American Honda Motor Co., Inc. – All Rights Reserved.
30. Disconnect the vehicle 8-pin connector and plug it
into the engine starter harness 8-pin connector. Plug
the remaining engine starter harness 8-pin
connector into the wiper switch.
31. Secure the engine starter harness to the vehicle
harness using two wire ties. Do not secure to the
SRS harness.
6D18151Y
BODY
SWITCH
2 8-PIN CONNECTORS
VEHICLE 8-PIN
CONNECTOR
ENGINE STARTER
HARNESS
6D1816BY
VEHICLE
HARNESS
ENGINE
STARTER
HARNESS
2 WIRE TIES
32. Secure the engine starter harness to the vehicle
harness with two wire ties in the areas shown.
33. Disconnect the vehicle 20-pin connector from the
TPMS control unit (removed in step 24) and plug it
into the engine starter harness 20-pin connector.
Plug the remaining engine starter harness 20-pin
connector into the TPMS control unit.
6D1817BY
VEHICLE
HARNESS
VEHICLE
CLIPS
ENGINE
STARTER
HARNESS
WIRE
TIES
WIRE TIE
VEHICLE
HARNESS
ENGINE
STARTER
HARNESS
Inside.
6D1818AY
VEHICLE 20-PIN
CONNECTOR
20-PIN
CONNECTOR
TPMS CONTROL
UNIT
VEHICLE 20-PIN
CONNECTOR
20-PIN
CONNECTOR
ENGINE STARTER
HARNESS