© 2010 American Honda Motor Co., Inc. – All Rights Reserved. AII 44367 (1008) 25 of 28
REMOTE ENGINE STARTER REGISTRATION
1. Get the PCM Code from ISIS.
2. Connect the HDS tester to the OBD II data link
connector, then turn the ignition switch on.
3. Start the HDS, and click the car icon.
4. Input the VIN and other information, then click the
check button.
Input the VIN and
other information.
CHECK BUTTON
5. Select “Honda Systems,” then click the check button.
6. Select “R/C ENG STARTER” and click the check
button.
Select
“Honda Systems”
CHECK BUTTON
Select
“R/C ENG
STARTER”
CHECK BUTTON