© 2010 American Honda Motor Co., Inc. – All Rights Reserved. AII 44367 (1008) 3 of 28
Clip
Cable clip
11 Urethane tapes
6 x 12 mm Washer bolt
6 mm Flange nut
2 Self-tapping screws, 5 x 12 mm
2Spacers
TOOLS AND SUPPLIES REQUIRED
Phillips screwdriver
Flat-tip screwdriver
Diagonal cutters
Ratchet
8 mm and 10 mm Sockets
10 mm wrench
Plastic trim tool (T/N SILTRIMTL10)
Felt-tip pen
Isopropyl alcohol
Scissors
Small flat-tip screwdriver
Shop towel
Scale
Rubber mallet
HDS (Honda Diagnostic System)
Fender cover
Needle nose pliers
Tape
10 mm Combination wrench
To Next Page
Loading...
