© 2010 American Honda Motor Co., Inc. – All Rights Reserved. AII 44367 (1008) 27 of 28
11. Check that “The registration of the Remote Control
Engine Starter Unit has been completed” is shown,
then click the check button.
12. Check that “Check that the engine can be started by
the Transmitter” is shown, then click the check
button.
13. Perform the function test on the next page, then
remove the HDS.
Check that “The registration of the
Remote Control Engine Starter Unit
has been completed” is shown.
CHECK BUTTON
Check that “Check that the engine can be
started by the Transmitter” is shown.
CHECK BUTTON
To Next Page
Loading...
