EasyManua.ls Logo

Honda BF225D - User Manual

Honda BF225D
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Thank you for purchasing a Honda
Outboard Motor.
This manual covers operation and
maintenance of the Honda BF200D/
BF225D/BF250D Outboard Motor.
All information in this publication is
based on the latest product
information available at the time of
approval for printing.
Honda Motor Co., Ltd. reserves the
right to make changes at any time
without notice and without incurring
any obligation.
No part of this publication may be
reproduced without written
permission.
This manual should be considered a
permanent part of the Outboard
Motor and should remain with it if it
is resold.
Throughout this manual, you will see
safety messages proceeded by the
following words and symbols. Here’s
what they mean:
Indicates that equipment or
property damage could result if
instructions are not followed.
Gives helpful information.
If a problem should arise, or if you
have any questions about the
Outboard Motor, consult an
authorized Honda Outboard Motor
dealer.
Honda Motor Co., Ltd. 2018, All
Rights Reserved
DANGER
Indicates serious injury or death
WILL result if instructions are
not followed.
WARNING
Indicates a strong possibility that
serious personal injury or death
may result if instructions are not
followed.
CAUTION
Indicates a possibility that
personal injury or equipment
damage could result if
instructions are not followed.
WARNING
Honda Outboard Motors are
designed to give safe and
dependable service if operated
according to instructions. Read
and understand the Owners
Manual before operating the
Outboard Motor. Failure to do so
could result in personal injury or
equipment damage.
42ZVL600.book 1 ページ 2018年7月19日 木曜日 午前9時6分

Table of Contents

Other manuals for Honda BF225D

Questions and Answers

  • V
    vickiecherryAug 9, 2025
    Why is the oil pressure warning system coming on in my Honda BF225D?
    • J
      Jeremy Wilkinson DVMAug 9, 2025
      If the oil pressure warning system activates on your Honda Outboard Motor, characterized by the oil pressure indicator failing to illuminate, the warning buzzer sounding, and the engine speed decreasing, the issue might stem from a shortage of engine oil. In this case, add engine oil to the specified level. Another potential cause is the use of improper engine oil, which requires you to change the engine oil.
  • R
    Ricardo CopelandAug 17, 2025
    What to do if the overheat warning system comes on in my Honda Outboard Motor?
    • K
      Kevin GarciaAug 17, 2025
      If the overheat warning system activates on your Honda Outboard Motor, with symptoms like the overheat indicator turning on, the warning buzzer sounding, and the engine speed decreasing, it could be due to several reasons. First, check if the cooling water intake port is clogged and clean it if necessary. Another possible cause is the usage of spark plugs with an improper heat range, in which case you should replace them. Other potential issues include a faulty water pump or thermostat, a clogged thermostat or cooling water passage, or exhaust gas invading the cooling system.
  • C
    Cristian ColemanAug 25, 2025
    What does it mean if the ACG warning system comes on in my Honda BF225D Outboard Motor?
    • Z
      Zachary YoungAug 25, 2025
      If the ACG indicator comes on and the ACG warning buzzer sounds intermittently on your Honda Outboard Motor, it indicates that the battery voltage is either too high or too low. To address this, check the battery. Another possible cause is a faulty ACG.
  • S
    Sandra AllenSep 1, 2025
    What to do if the water separator warning buzzer sounds in my Honda Outboard Motor?
    • M
      michelle08Sep 1, 2025
      If the water separator warning buzzer sounds on your Honda Outboard Motor, it means that water has accumulated in the water separator. In this case, drain the water separator and check the fuel tank and fuel line for water accumulation.

Summary

4. Controls and Features

Remote Control Lever Types

Details operation of different remote control lever types.

Emergency Stop Switch System

Operation and safety of the emergency stop switch system.

5. Installation

Outboard Motor Installation Procedure

Steps for physically mounting the outboard motor.

Battery Connections

Guidance on connecting the boat battery.

6. Pre-Operation Checks

Engine Cover and Engine Oil Checks

Checking engine cover, oil level, and oil change procedure.

7. Starting the Engine

Starting Procedure (D1, D2 Types)

Step-by-step guide to starting the engine for D1/D2 types.

8. Operation

Gear Shifting Operation

How to shift gears using different control lever types.

Engine Protection System Operation

How the engine protection systems operate and indicate faults.

9. Stopping the Engine

Normal Engine Stop Procedures

Normal procedures to stop the engine using various controls.

12. Maintenance

Maintenance Schedule and Engine Oil

Schedule of periodic maintenance tasks and engine oil replacement.

15. Troubleshooting

Warning System Troubleshooting

Diagnosing and resolving issues indicated by warning systems.

Honda BF225D Specifications

General IconGeneral
Max Power Output225 HP
Full Throttle RPM Range5000-6000 RPM
Starting SystemElectric
Lubrication SystemWet Sump
Cooling SystemWater Cooled
SteeringRemote
ExhaustThrough Propeller
Valve TrainSOHC
Fuel DeliveryPGM-FI (Programmed Fuel Injection)
Fuel TypeUnleaded Gasoline
Shaft Length25 inches
Engine Type4-stroke, SOHC
Displacement3.6L (3584 cc)
Ignition SystemFull-transistorized

Related product manuals