Honda CBR1000RR Fireblade 2021 User Manual

Emission Control Systems
Your vehicle engine emits combustion
byproducts, including carbon monoxide (CO),
oxides of nitrogen (NOx), and hydrocarbons
(HC). Gasoline evaporation also emits
hydrocarbons. Controlling the production of
NOx, CO, and HC is important for the
environment.
Exhaust Emission Requirements
The U.S. Environmental Protection Agency
(EPA), the California Air Resources Board
(CARB), and Environment and Climate Change
Canada (ECCC) require that your vehicle comply
with applicable exhaust, crankcase, and fuel
permeation emission standards during its useful
life, when operated and maintained according
to the instructions provided.
CARB also requires that your vehicle comply
with applicable evaporative emission
requirements during its useful life, when
operated and maintained according to the
instructions provided.
USA
Compliance with the terms of the
Distributor's Warranties for Honda Motorcycle
Emission Control Systems is necessary in order
to maintain a valid emissions system warranty.
The Vehicle Emission Control Information label
is located on the left side of the swingarm.
20200219171806_31MKR6000_enu_BOOK Page 222 Wednesday, February 19 2020 17:28:26 JST
Emission Control Systems
Information
219
Continued
Vehicle emission control
information label
Canada
Vehicle emission control
information label

Honda CBR1000RR Fireblade 2021 Specifications

General

Engine Type	Liquid-cooled 4-stroke 16-valve DOHC inline-4
Bore x Stroke	81 mm x 48.5 mm
Compression Ratio	13.0:1
Transmission	6-speed manual
Curb Weight	201 kg (443 lbs)
Displacement	999cc
Max Power Output	160 kW (214 hp) @ 14, 500 rpm
Max Torque	113 Nm (83 lb-ft) @ 12, 500 rpm
Fuel System	PGM-FI
Front Suspension	43mm Showa Big Piston Fork
Front Brakes	Dual 330mm discs with 4-piston calipers
Rear Brakes	Single 220mm disc with single-piston caliper
Front Tire	120/70 ZR17
Seat Height	830 mm
Fuel Capacity	16.1 liters
Rear Suspension	Pro-Link with gas-charged HMAS damper
Rear Tire	200/55 ZR17