Honda Compact navigation System - Page 30

Honda Compact Navigation System Owner’s Manual 25
Hands-free Phone Calls
Pairing Using the Device
Settings
1. From the main menu of the
device, touch Tools > Settings >
Bluetooth > Enabled.
2. Touch Tools > Settings >
Bluetooth > Add Phone.
3. Enable the Bluetooth component
on your phone.
4. Enable Find Me/Discoverable/
Visible mode on your phone.
NOTE: This might be in a
menu called Settings, Bluetooth,
Connections, or Hands-free.
5. Touch OK on the device.
6. Select your phone from the list of
devices.
7. Touch Save.
8. Enter the device Bluetooth PIN
(1234) in your phone.
Tips After Pairing Your
Devices
After the initial pairing, the •
two devices can connect
automatically each time you turn
them on.
When your phone is connected •
to your device, you are ready to
make phone calls.
When you turn on the device, it •
tries to connect to the last phone
to which it was connected.
You might have to set your •
mobile phone to connect to the
device automatically when it is
turned on.