EasyManua.ls Logo

Honda CTX700A - Maintenance Fundamentals

Honda CTX700A
141 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
Maintenance
Maintenance Fundamentals
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety,
but because having a breakdown, or even a
flat tyre, can be a major inconvenience.
Check the following items before you ride
motorcycle:
Fuel level − Fill fuel tank when necessary.
2 P. 42
Throttle − Check for smooth opening and
full closing in all steering positions.
2 P. 90
Engine oil level − Add engine oil if
necessary. Check for leaks. 2 P. 70
Coolant level − Add coolant if required.
Check for leaks. 2 P. 76
Drive chain − Check condition and slack,
adjust and lubricate if necessary.
2 P. 82
Brakes − Check operation;
Front and Rear: check brake fluid level and
pads wear.
2 P. 78, 79
Lights and horn − Check that lights,
indicators and horn function properly.
Engine stop switch − Check for proper
function.
Side stand ignition cut-off system − Check
for proper function.
2 P. 81
Wheels and tyres − Check condition, air
pressure and adjust if necessary. 2 P. 59
Clutch − Check operation;
Adjust freeplay if necessary. 2 P. 87
Pre-ride Inspection
CTX700A only
14 CTX700-32MJF8000.book 52 ペー 2013年5月9日 木曜日 午後9時59分

Table of Contents