Operation Guide
27
Continued
Speedometer
Standby indicator
Flashes if the motor can activate when the
power switch is in the (On) position.
When the standby indicator does not
flash (P.73)
To set the clock: (P.30)
• Tripmeter: Distance ridden since tripmeter was reset. To reset tripmeter, press and hold
the SEL switch with tripmeter displayed.
Odometer [TOTAL]/Tripmeter [TRIP]/Clock (12-hour display)
SEL switch selects the odometer, tripmeter and clock.
• Odometer: Total distance ridden.
When “hot” or “cold” flashes (P.74)
Side stand indicator
Comes on when the side stand is lowered.
To Next Page
Loading...
