Honda PCX125 User Manual

~J 109/10/13 10,23032 32KWNAOO 067
+
II
HELMEr HOLDER
The helmet holder (1) is on the left side
below the seal. The helmet holder
is
designed to secure your helmet while
parked.
Open the seat (page
40 ).
Route the helmet wire (2) through the
helmet D-ring (3) and hook the loops
of the
helmet wire onto the helmet holder.
Close the seat and lock it securely.
The helmet wire is furnished
in the tool kit
(page
87).
(2)
(1) Helmet holder
(2) Helmet wire
on D-ring
(1)
+
AWARNING
Riding with a helmet attached to the
holder
can interfere with the rear wheel
or suspension and could cause a
crash
in which you can be seriously
hurt
or killed.
Use the helmet holder only while
parked.
Do not ride with a helmet
secured
by the holder.
57
II
Provided by http://www.hondapcx.org

Honda PCX125 Specifications

General

Fuel System	PGM-FI electronic fuel injection
Seat Height	764 mm
Starter	Electric
Wheelbase	1, 315 mm
Transmission	Automatic
Front Suspension	Telescopic fork
Front Brake	Single disc
Rear Brake	Drum
Engine Type	Single-cylinder, liquid-cooled, 4-stroke