105
uuIndicatorsuDriver Information Interface Warning and Information Messages
Continued
Message Condition Explanation
●
Appears when the transmission system temperature
is too high. The vehicle does not operate properly.
●
Stop in a safe place in (P.
●
Let the engine idle until the message disappears.
• Appears when you set the power mode to
ACCESSORY or ON.
2 Starting the Engine P. 524
• Appears when the engine does not restart
automatically due to the following reason:
• The hood is open.
• There is a problem in the system that disables Auto
Idle Stop.
• Follow the normal procedure to start the engine.
2 Starting the Engine P. 524
• Appears when you attempt to change to another
gear position with the transmission in (P and the
engine OFF.
• To select another gear position while in (P, the engine
must be ON.
• Appears when you set the power mode to OFF while
driving.
• Immediately stop in a safe place, set the parking brake,
then restart the engine. If the message disappears,
continue driving.
●
Appears when you try to change the gear position
after the position has automatically been changed to
(P with the driver’s door open and the driver’s seat
belt unfastened.
●
Press the park button if you leave the vehicle.
21 PILOT-31TG76500.book 105 ページ ２０２０年３月１８日 水曜日 午後４時３８分
To Next Page
Loading...
