106
uuIndicatorsuDriver Information Interface Warning and Information Messages
Message Condition Explanation
• Appears if the vehicle is stationary and the
transmission is put into (N, the driver's seatbelt is
unfastened, and the brake pedal is released, as there
is a risk that the vehicle might roll unexpectedly.
• Press the (P button before releasing the brake pedal
when idling, parking or exiting the vehicle.
2 Shift Operation P. 534
• Appears when the engine stops without the
transmission in (P, and does not restart
automatically.
• Appears if you open the hood while Auto Idle Stop
activates.
• If you want to set the power mode to ON, change the
gear position to (P.
• If you want to start the engine, follow the normal
procedure.
2 Starting the Engine P. 524
• Appears when you change to (N, then release the
(N button.
2 If you want to keep the transmission in (N
position [car wash mode] P. 536
• Appears when you press and hold (N button for
more than two seconds.
• Disappears when you set the gear position to other
than
(N.
2 If you want to keep the transmission in (N
position [car wash mode] P. 536
• Appears when car wash mode is not available due to
hot transmission.
• When transmission is too hot, car wash mode may not
be available. Let the engine idle and cool down
transmission.
2 If you want to keep the transmission in (N
position [car wash mode] P. 536
• Appears when you try to change the gear position
without depressing the brake pedal.
• Depress the brake pedal, then select a shift button.
21 PILOT-31TG76500.book 106 ページ ２０２０年３月１８日 水曜日 午後４時３８分
To Next Page
Loading...
