uuIf a Tire Goes FlatuChanging a Flat Tire
684
1. Push the rear edge of the handle on the
floor lid and open the lid.
2. Pull and remove the cover. Take the wheel
nut wrench and jack-handle bar out of the
rear side compartment.
3. Loosen the strap, then take the jack out.
■
Getting Ready to Replace the Flat Tire
Do not use the jack if it doesn’t work properly. Call
your dealer or a professional towing service.
Cover Wheel Nut Wrench
Jack
Handle Bar
21 PILOT-31TG76500.book 684 ページ 2020年3月18日 水曜日 午後4時38分