Continued
685
uuIf a Tire Goes FlatuChanging a Flat Tire
4. Remove the cover and the rubber plug on
the cargo area lining to access the shaft
for the spare tire hoist.
5. Put the wheel nut wrench with the jack
handle bar on the hoist shaft.
Turn the wrench to the left to lower the
spare tire to the ground.
6. Keep turning the wheel nut wrench to
create slack in the cable.
7. Remove the bracket from the spare tire.
1Getting Ready to Replace the Flat Tire
The wheel nut wrench supplied with your vehicle is
specially adapted to fit the hoist shaft. Do not use any
other tool.
Jack
Handle Bar
Wheel Nut Wrench
21 PILOT-31TG76500.book 685 ページ ２０２０年３月１８日 水曜日 午後４時３８分
To Next Page
Loading...
