Honda ST1100 1996+ User Manual

- Copyright for this owners manual only ©2011 LIFRASCHAL -
1
Owner's Manual Pan European ST1100(A) 1996+
IMPORTANT NOTICE
 OPERATOR AND PASSENGER
This motorcycle is designed to carry the operator and one passenger. Never exceed the
maximum weight capacity as shown on the tyre information label.
 ON-ROAD USE
This motorcycle is designed to be used only on the road.
 READ THIS OWNER'S MANUAL CAREFULLY
Pay special attention to statements preceded by the following words:
Indicates a strong possibility of severe personal injury or death if instructions are not followed.
CAUTION:
Indicates a possibility of personal injury or equipment damage if instructions are not followed.
NOTE: Gives helpful information.
This manual should be considered a permanent part of the motorcycle and should remain with
the motorcycle when resold.
HONDA PAN EUROPEAN
ST1100
OWNER'S MANUAL

Honda ST1100 1996+ Specifications

General

Compression Ratio	10.0:1
Cooling System	Liquid-cooled
Transmission	5-speed
Final Drive	Shaft
Rear Tire	160/70-17
Engine Type	Liquid-cooled, 4-stroke, 90° V4
Ignition	Digital transistorized
Front Suspension	41mm telescopic fork
Rear Suspension	Pro-Link single shock with adjustable preload
Front Brakes	Dual hydraulic discs
Rear Brakes	Single hydraulic disc
Wheelbase	61.4 in (1560 mm)
Fuel Capacity	28.0 L (7.4 US gal)
Fuel System	Carburetor
Front Tire	110/80-18
Seat Height	805 mm (31.7 in)

Summary

Important Notice

Operator and Passenger Capacity

Motorcycle capacity and maximum weight limits for rider and passenger.

On-Road Use Designation

Specifies that the motorcycle is designed for road use only.

Manual Reading Guidance

Emphasis on reading the manual carefully and paying attention to warnings.

Motorcycle Safety

Safe Riding Rules

Essential rules and precautions for safe motorcycle operation.

Protective Apparel Recommendations

Recommended gear and clothing for rider safety.

Modifications and Loading

Loading and Accessories Guidelines

Guidelines for adding accessories and cargo safely to the motorcycle.

Instruments and Indicators

Gauge and Speedometer Descriptions

Indicator Lights Explained

ABS/TCS Indicator Light Operation

Major Components

Rear Suspension Adjustment

Adjusting spring preload and rebound damping on the rear shock absorber.

Brake System Overview

Description of the hydraulic disc brake system and maintenance.

Brake Fluid Maintenance

Front Brake Fluid Check

Rear Brake Fluid and Lever Adjustment

Clutch and Coolant

Fuel System

Fuel Tank Operation

Fuel Type Recommendations

Engine Oil and Lubrication

Checking Engine Oil Level

Procedure for checking the engine oil level.

Viscosity and Final Drive Oil

Tires and Wheels

Tubeless Tire Warnings

Tire Specifications and Pressures

Tire Tread Depth and Repair

Essential Components

Operation

Pre-Ride Inspection Checklist

Daily checks to perform before riding the motorcycle.

Starting the Engine Procedures

Step-by-step procedures for starting the motorcycle's engine.

Engine Starting Procedures

Preparation and Confirmation

Pre-start checks and confirmations required before ignition.

Normal Temperature Starting

Starting procedures for typical operating air temperatures.

Starting in Different Conditions

High/Low Temperature Starting

Starting procedures for various air temperatures and choke use.

Flooded Engine Procedure

How to clear a flooded engine and restart.

Running-In the Motorcycle

Guidelines for the initial break-in period to ensure engine longevity.

Riding Precautions

Engine Speed and Redline Warnings

General Riding Safety Advice

Braking System

Braking Operation Techniques

Normal and maximum braking methods and downshifting.

Braking Safety Reminders

Key safety points for effective and safe braking.

Standard vs. ABS/CBS/TCS Braking

Differences in braking systems between models.

ABS System Operation

ABS Indicator Light Explained

Meaning and troubleshooting of the ABS warning light.

Traction Control System (TCS)

TCS Activation Indicator Light

TCS ON/OFF Control

TCS Indicator Light Status

Maintenance Schedule

Scheduled Maintenance Tasks

Table detailing maintenance tasks and their intervals.

Maintenance Notes

Service Recommendations and Qualifications

Maintenance Precautions

Colour Label Information

Post-Collision Inspection

Filters & Lubrication

Engine Oil and Filter Change

Procedures for changing the engine oil and filter.

Oil Draining and Filter Installation

Oil Filter Tightening Specification

Air Cleaner Service

Air Cleaner Replacement Procedure

Engine Maintenance

Spark Plug Replacement Procedure

Recommended spark plugs and their installation process.

Spark Plug Caution and Idle Speed

Idle Speed Adjustment Procedure

Idle Speed Adjustment

Adjusting Idle Speed Knob

Drive Train Maintenance

Final Drive Oil Change Procedure

Front Wheel Service

Front Wheel Removal (Standard Model)

Front Wheel Removal (CBS/ABS/TCS Models)

Wheel Installation Cautions

Rear Wheel Removal

Rear Wheel Removal Notes

Wheel Tightening and Brake Pads

Brake System Inspection

Front/Rear Brake Pad Check

CBS/ABS/TCS Brake System Check

Side Stand System

Electrical System

Battery Precautions and Removal

Fuse Replacement

Fuse Box and Main Fuse

Fuse Locations

Storage Guide

Motorcycle Storage Preparation

Steps for preparing the motorcycle for extended storage.

Removal From Storage

Post-Storage Checks and Riding

Specifications

Dimensions and Weight

Motorcycle overall dimensions and weight specifications.

Capacities and Engine Specs

Fluid capacities, engine bore, stroke, and displacement.

Chassis and Suspension Specs

Caster angle and trail measurements.

Model Specifics and Electricals

Tire Sizes and Power Transmission

Tire dimensions and power transmission gear ratios.

Electrical Components and Fuses

Battery, generator specifications, and fuse ratings.

Lighting Specifications

Wattage specifications for various motorcycle lights.