(1)
(2)
(3)
(1) ignition switch
(2) neutral indicator
(3) engine stop switch
66
Preparation
Basic Operation & Riding
Starting & Stopping the Engine
Always follow the proper starting procedure described below.
For your safety, avoid starting or operating the engine in an enclosed
area such as a garage. Your ATV’s exhaust contains poisonous carbon
monoxide gas which can collect rapidly in an enclosed area and cause
illness or death.
Confirm the following:
The transmission is in neutral, and the neutral indicator ( ) is ON.
The engine stop switch ( ) is set to RUN ( ).
Before starting, select a level surface and lock the parking brake
(page ).
Turn the ignition switch ( ) ON ( ).
1.
2. 1
2
38
3
１０／０４／１９ １３：１０：３２ ３１ＨＮ８６８０ ００７５
To Next Page
Loading...
