72
Shifting Gears
Basic Operation & Riding
Neutral (N)
Use neutral when you start the engine, or if it is necessary to stop briefly
with the engine idling.
Drive (D)
Reverse (R)
Manual shift (ESP) mode:
In this mode, you can shift gears much like a manual transmission, but
without operating a clutch.
You can select three forward shift positions by operating the shift
switches; 1, 2, and 3.
The gear position indicator shows the selected position and the drive
mode indicator shows ‘‘ESP.’’
When you tow a trailer, select the 1st shift position for proper
performance.
Automatic shift (AUTO) mode:
Use this mode for everyday riding. The transmission automatically
adjusts to keep the engine at the best speed for riding conditions.
The gear position indicator shows ‘‘D’’ and the drive mode indicator
disappears.
Your ATV has three shift lever positions: neutral (N), drive (D), and
reverse (R).
Use this position to ride in reverse (page ).
Use this position for normal riding. The following two modes can be
selected in the drive position; automatic shift (AUTO) mode and manual
shift (ESP) mode.
You can select the desired mode with the drive mode select switch
(page ).
78
30
１０／０４／１９ １３：１１：２２ ３１ＨＮ８６８０ ００８１
To Next Page
Loading...
