69
Stalled Engine
Starting & Stopping the Engine
Basic Operation & Riding
If the engine stalls, shift into neutral (N) and restart the engine.
If you are unable to shift to neutral (N) from drive (D), you can restart
the engine by squeezing the front brake lever and pressing the start
button while the vehicle is stopped.
Do not press the throttle lever while starting in gear. Your ATV is
equipped with a start inhibitor system that will cut off the ignition if the
throttle is open while attempting to start in gear.
Once you have started the engine, release the front brake lever, then
apply throttle gradually.
１０／０４／１９ １３：１０：５３ ３１ＨＮ８６８０ ００７８
To Next Page
Loading...
