Honda VF1000F 1985 User Manual

SWITCHES
Install the new gasket and do w el pins.
Insta ll the countershaft bearing cover.
T ighten the
oi I bel t.
Install the water pump and hos e.
Install the drive sprocket and tighten the drive sprocket mount
bolt.
TORQUE:
50 - 54 N. m (5 . 0-5.4 kg·m, 36 - 39 ft·lb)
Install the clutch slave cylinder, drive sprocket cover, and
gearshift pedal
in the reverse order of removal.
CLUTCH SWITCH
Check the clutch switch for continuity with the clutch lever
released and applied.
Replace if it is faulty .
21-4
(2) APPLIED: CONTINU I TY
RELEASED: NO CONTINUITY

Honda VF1000F 1985 Specifications

General

Displacement	998 cc
Compression Ratio	10.5:1
Ignition	Electronic
Transmission	5-speed
Final Drive	Shaft
Engine Type	Liquid-cooled, 4-stroke, DOHC, 90-degree V4
Bore x Stroke	77.0 mm x 53.6 mm
Fuel System	Four 36mm Keihin carburetors
Front Suspension	Telescopic fork
Rear Suspension	Pro-Link single shock
Front Brakes	Dual disc
Rear Brakes	Single disc
Rear Tire	130/80 V18
Max Power	113 hp @ 10, 500 rpm