Name: Honda VF1000F 1985
Brand: Honda
Rating: 4 (1 reviews)

To Next Page

To Previous Page

MAINTENANCE

Remove

the

left side cover.

Remove

the

valve cap and measure

the

shock absorber air

pressure.

REAR

SHOCK ABSORBER

AIR

PRESSURE:

0-300

kPa

(0-3.0

kg/cm

0-43

psi)

NOTE

• Check

the

air pressure when

the

shock

absorber

cold.

NUTS,

BOLTS,

FASTENERS

Check

that

all chassis nuts and bolts are tightened

their

correct

torque

values (Section 1)

the

intervals

shown

the

Maintenance Schedule

(Page

3·3).

Check

all

cotter

pins, safety clips, hose clamps and cable stays.

WHEELS

NOTE

• Tire pressure shOUld

checked

when

tires are

COLD.

Check

the

tires

for

cuts, imbedded nails, or

other

sharp

Objects.

RECOMMENDED

TIRES

AND

PRESSURES:

Front

Rear

Tire size

100/90V1B-

140/BOV17-V250

V250

*140/BOVR17·V250

Driver

only

250

(2.5,36)

290

(2.9,42)

tire

pres-

sure

Driver

kPa,

(kg/em'

and

one

250

(2.5,36)

290

(2.9, 42)

psi)

passen-

ger

BRIDGE·

G531

G532,

*G520,

*R104

Tire

STONE

brand

DUNLOP

K500

K500,

*K400

* No application

for

and

optional

for

other models.

Check

the

front

and rear wheels

for

trueness (Section 15 and

161.

Measure

the

tread

depth

the

center

the

tires.

Replace

the

tires if

the

tread

depth

reaches

the

following limit:

Minimum

tread

depth:

Front:

1.5

(1/16

in)

Rear:

2.0

(3/32

in)

3-17

(1)

AIR

ALVE

Questions and Answers:

Need help?

Do you have a question about the Honda VF1000F 1985 and is the answer not in the manual?

Honda VF1000F 1985 Specifications

General

Displacement	998 cc
Compression Ratio	10.5:1
Ignition	Electronic
Transmission	5-speed
Final Drive	Shaft
Engine Type	Liquid-cooled, 4-stroke, DOHC, 90-degree V4
Bore x Stroke	77.0 mm x 53.6 mm
Fuel System	Four 36mm Keihin carburetors
Front Suspension	Telescopic fork
Rear Suspension	Pro-Link single shock
Front Brakes	Dual disc
Rear Brakes	Single disc
Rear Tire	130/80 V18
Max Power	113 hp @ 10, 500 rpm